L2TP Setup For Windows 8 Through Windows Built-in VPN Settings

Step #1: Click on your LAN/ WiFi icon on the taskbar and open “Network and Sharing center”

Step #2: Click on “Set up a new connection or network”.

Step #3: Select “Connect to a workplace” and click on “Next”.

Step #4: Select “Use my Internet connection (VPN)”.

Step #5: In “Internet address” enter your desired FastestVPN’s L2TP server address. For example Singapore: sg.jumptoserver.com.
Click here to get FastestVPN’s complete L2TP server list

In “Destination name” write “FastestVPN_L2TP” (or whatever you like)

Click on “Create”

Step #6: Now click on “Change Adapter Settings” in Network and Sharing Center.

Step #7: Right click on the VPN profile you just created and select “Properties”

Step #8: Go to Security tab. Select “Layer 2 Tunneling protocol with IPSec” in Type of VPN

Enable “Allow these protocols” and check mark “Challenge Handshake Authentication protocol” and “Microsoft CHAP Version 2”

Click on “Advanced Settings”.

Step #9: Enable “Use preshared Key” and write psk123 in the ‘Key’ field

Click on “OK” and also click on “OK” on Properties Window to close them.

Step #10: Click on your Network icon on Taskbar, select your VPN profile and click on “Connect”

Step #11: Enter your FastestVPN username and FastestVPN password and click on “OK”

It will be connected shortly.

Enjoy Complete Online Freedom with FastestVPN Speed

When you need to disconnect VPN, just click on “Disconnect” button under your VPN profile