Netgear Router Tutorials

 

Setup FastestVPN on Your Netgear Router

 
Netgear routers unfortunately do not act as OpenVPN client, therefore users cannot setup VPN directly on them. Nonetheless, you can follow these alternate steps to setup VPN on router Netgear.

 
Step 1: Flash your router to DD-WRT or Tomato firmware
Step 2: Setup VPN on that DD-WRT or Tomato flashed router


Step 1: Flash your router to DD-WRT or Tomato firmware

 
You can flash your router to any of these firmware, DD-WRT or Tomato. First, you need to check whether your particular Netgear router’s model is supported by DD-WRT or Tomato or not.
 
To check if your router is supported by DD-WRT firmware, click here. If your router is supported, you will also find the “Install Guide” next to its name
 
To check if your router is supported by Tomato firmware, click here. If your router is listed there, click on the router name to find its flashing guide
 
Once you have flashed your router to DD-WRT or Tomato, proceed to Step 2

If your router is not supported by any of these firmware, we suggest you to get a VPN supported WiFi router.


Step 2: Setup VPN on your DD-WRT or Tomato flashed router

 
To setup VPN on DD-WRT flashed router, click here
 
To setup VPN on Tomato flashed router, click here

 
If you face any issues, please contact our support on live chat or email [email protected] with screenshots of router’s configurations page.

 
Enjoy Complete Online Freedom with FastestVPN Speed